Filter Type Bwcc - Agilent Technologies X Series Manual

Mode
Remote Command
Example
Remote Command Notes
Dependencies
Preset
State Saved
Range
Backwards Compatibility SCPI
Initial S/W Revision
Modified at S/W Revision

Filter Type Bwcc

This parameter is strictly for Bwcc purposes.
Remote Command
Preset
BASIC, PN, WCDMA, C2K, GSM, WIMAX OFDMA, TD-SCDMA,
1xEV-DO, DVB-T/H, DTMB (CTTB), ISDB-T, CMMB, LTE, LTETDD,
Digital Cable TV
[:SENSe]:WAVeform:DIF:FILTer:TYPE GAUSsian|FLATtop
[:SENSe]:WAVeform:DIF:FILTer:TYPE?
(With DIF40 and/or WBDIF)
[:SENSe]:WAVeform:DIF:FILTer:TYPE
GAUSsian|FLATtop|SNYQuist|RSNYquist|RCOSine|RRCosine
[:SENSe]:WAVeform:DIF:FILTer:TYPE?
WAV:DIF:FILT:TYPE GAUS
WAV:DIF:FILT:TYPE?
You must be in a mode that includes the Waveform measurements to use this
command. Use INSTrument:SELect to set the mode.
Gaussian and Flattop are available in all DIF configurations. For the other
filter types, the filters are only available with PXA or when Option B40 is
installed.
BASIC with B40 or B1X: FLATtop
All other apps: GAUSsian
Saved in instrument state.
Gaussian|FlatTop
(With Digital IF and/or Option B40 or B1X)
Gaussian|Flattop|Short nyquist|Root Short Nquist|Raised Cosine|Root
RaisedCosine
[:SENSe]:WAVeform:BANDwidth:SHAPe
[:SENSe]:WAVeform:BWIDth:SHAPe
[:SENSe]:WAVeform:BANDwidth|BWIDth[:RESolution]:TYPE
Prior to A.02.00
A.03.00
[:SENSe]:WAVeform:WBIF:FILTer[:TYPE]
GAUSsian|NONE|NYQuist|RNYQuist|RCOSine|RRCosine
[:SENSe]:WAVeform:WBIF:FILTer[:TYPE]?
BASIC with B40 or B1X : FLATtop
All other apps: GAUSsian
Waveform Measurement
BW
291