Scale/Div (Waveform View); Ref Position (Waveform View) - Agilent Technologies X Series Manual

Complex Spectrum Measurement
Span X Scale

Scale/Div (Waveform View)

Allows you to set the horizontal scale in the waveform view window by changing the time value per
division.
Key Path
Mode
Remote Command
Example
Notes
Couplings
Preset
State Saved
Min
Max
Initial S/W Revision

Ref Position (Waveform View)

Allows you to set the reference position in the waveform view window to Left, Ctr (center) or Right.
Key Path
Mode
Remote Command
Example
Notes
Preset
272
SPAN X Scale
BASIC
:DISPlay:SPECtrum:VIEW[1]:WINDow2:TRACe:X[:SCALe]:PDIVi
sion <time>
:DISPlay:SPECtrum:VIEW[1]:WINDow2:TRACe:X[:SCALe]:PDIVi
sion?
DISP:SPEC:VIEW:WIND2:TRAC:X:PDIV 1e–9
DISP:SPEC:VIEW:WIND2:TRAC:X:PDIV?
You must be in the IQ Analyzer (Basic) mode to use this command. Use
INSTrument:SELect to set the mode.
If the Auto Scaling is set to On, this value is automatically determined by the
measurement result. When you set this value manually, Auto Scaling
automatically changes to Off.
18.80 us
Saved in instrument state.
1.000 ns
1.000 s
Prior to A.02.00
SPAN X Scale
BASIC
:DISPlay:SPECtrum:VIEW[1]:WINDow2:TRACe:X[:SCALe]:RPOSi
tion LEFT|CENTer|RIGHt
:DISPlay:SPECtrum:VIEW[1]:WINDow2:TRACe:X[:SCALe]:RPOSi
tion?
DISP:SPEC:VIEW:WIND2:TRAC:X:RPOS LEFT
DISP:SPEC:VIEW:WIND2:TRAC:X:RPOS?
You must be in the IQ Analyzer (Basic) mode to use this command. Use
INSTrument:SELect to set the mode.
LEFT