User Preset - Agilent Technologies X Series Manual

User Preset

Accesses a menu that gives you the following three choices:
User Preset – recalls a state previously saved using the
User Preset All Modes –
Save User Preset – saves the current state for the current mode
Key Path
Initial S/W Revision
User Preset
sets the state of the currently active mode back to the state that was previously saved for
User Preset
this mode using the
Save User Preset
only recalls the Mode Preset settings, but it also recalls all of the mode persistent settings, and the
Input/Output system setting that existed at the time
If a Save User Preset has not been done at any time,
the currently active mode. The default user preset files are created if, at power-on, a mode detects there is
no user preset file. There will never be a scenario when there is no user preset file to restore. For each
mode, the default user preset state is the same state that would be saved if a
performed in each mode right after doing a Restore Mode Default and after a Restore Input/Output
Defaults.
The User Preset function does the following:
• Aborts the currently running measurement.
• Sets the mode State to the values defined by
• Makes the saved measurement for the currently running mode the active measurement.
• Brings up the saved menu for the power-on mode.
• Clears the input and output buffers.
• Sets the Status Byte to 0.
Key Path
Remote Command
Example
presets all of the modes in the analyzer
Front-panel key
Prior to A.02.00
menu key or the SCPI command, SYST:PRES:USER:SAV. It not
Save User Preset
User Preset
:SYSTem:PRESet:USER
:SYST:PRES:USER:SAVE
:SYST:PRES:USER
Save User Preset
was executed.
Save User Preset
User Preset recalls the default user preset file for
.
System Functions
User Preset
function.
is
Save User Preset
211