View/Display
Accesses a menu of functions that enable you to set up and control the display parameters for the current
measurement.
This topic contains the following sections:
"View Selection by name (Remote Command Only)" on page 345
"View Selection by number (Remote Command Only)" on page 345
View Selection by name (Remote Command Only)
Selects the results view.
Key Path
Mode
Remote Command
Example
Notes
Preset
State Saved
Range
Initial S/W Revision
Modified at S/W Revision
View Selection by number (Remote Command Only)
Displays the numeric values of the measurement results.
Mode
Remote Command
Example
View/Display
BASIC, PN, WCDMA, C2K, GSM, WIMAX OFDMA, TD-SCDMA,
1xEV-DO, DVB-T/H, DTMB (CTTB), ISDB-T, CMMB, LTE, LTETDD,
Digital Cable TV
:DISPlay:WAVeform:VIEW[:SELect] RFENvelope|IQ
:DISPlay:WAVeform:VIEW[:SELect]?
DISP:WAV:VIEW RFEN
DISP:WAV:VIEW?
You must be in a mode that includes the Waveform measurement to use this
command. Use INSTrument:SELect to set the mode.
RFENveloper
Saved in instrument state.
RF Envelope|IQ Waveform
Prior to A.02.00
A.03.00
BASIC, PN, WCDMA, C2K, GSM, WIMAX OFDMA, TD-SCDMA,
1xEV-DO, DVB-T/H, DTMB (CTTB), ISDB-T, CMMB, LTE, LTETDD,
Digital Cable TV
:DISPlay:WAVeform:VIEW:NSELect <integer>
:DISPlay:WAVeform:VIEW:NSELect?
DISP:WAV:VIEW:NSEL 1
DISP:WAV:VIEW:NSEL?
Waveform Measurement
View/Display
345