Agilent Technologies X Series Manual page 52

Using Help
Navigating Windows HTML Help (CHM) Files
Getting Help for a Specific Key
1. If the Help window is already open, press the desired key. The relevant Help topic appears.
Note that the function normally invoked by the key is not executed when the key is pressed with the
Help window open. If you want to execute the key's function, first close Help by pressing the
key (as described in
(Esc)
opening Help again (if required).
2. If the Help window is not already open, press the desired key (which executes the key's function),
then press the Help key to display the relevant Help page. Help is available for all softkeys, and for
all the Front-panel keys listed under the "System Functions" and "Measurement" sections.
For details of how to navigate within the panes of the Help window, see
Help (CHM) Files" on page
Closing the Help Window
To close the Help window, and return to the measurement application, press the
(depicted below).
Viewing Help on How to Use Help
With the Help window open, press the green
The "Using Help" page appears, as shown below.
Exiting Help on How to Use Help
See the Section "To Go Back or Forward: display the Previously-viewed or Next-viewed Topic in the
Topic Pane" on page 57
52
"Closing the Help Window" on page
50.
Help
for details of several methods to accomplish this.
52), then press the key, before
"Navigating Windows HTML
key again.
Cancel
Cancel (Esc) key
Chapter 1