System; Show - Agilent Technologies X Series Manual

System

Opens a menu of keys that access various configuration menus and dialogs.
Key Path
Notes
Initial S/W Revision

Show

Accesses a menu of choices that enable you to select the information window you want to view.
Key Path
Mode
Remote Command
Example
Notes
Preset
State Saved
Range
Initial S/W Revision
Errors
There are two modes for the Errors selection, History and Status.
The list of errors displayed in the Errors screen does not automatically refresh. You must press the
Refresh key or leave the screen and return to it to refresh it.
History brings up a screen displaying the event log in chronological order, with the newest event at the
top. The history queue can hold up to 100 messages (if a message has a repeat count greater than 1 it only
counts once against this number of 100). Note that this count bears no relation to the size of the SCPI
queue. If the queue extends onto a second page, a scroll bar appears to allow scrolling with a mouse.
Time is displayed to the second.
Status brings up a screen summarizing the status conditions currently in effect. Note that the time is
displayed to the second.
Front-panel key
No remote command for this key specifically.
Prior to A.02.00
System
All
:SYSTem:SHOW
OFF|ERRor|SYSTem|HARDware|LXI|HWSTatistics|ALIGnment|SO
FTware|CAPPlication
:SYSTem:SHOW?
:SYST:SHOW SYST
This command displays (or exits) the various System information screens.
OFF
No
OFF| ERRor | SYSTem | HARDware | LXI | HWSTatistics | ALIGNment |
SOFTware|CAPPlication
Prior to A.02.00
System Functions
System
147