Agilent Technologies X Series Manual page 191

Parameter
Emulated GPIB Name
Emulated GPIB Logical Unit
Emulated GPIB Address
Key Path
Mode
Remote Command
Example
Preset
Preset
State Saved
Range
Initial S/W Revision
Reset Web Password
The embedded web server contains certain capability which are password protected; modifying the LAN
configuration of the instrument, and access to web pages that can change the settings of the instrument.
The default password from the factory is 'agilent' (without the quotes). The control provided here is the
means to set the web password as the user desires, or to reset the password to the factory default.
Selecting Reset web password brings up a control for resetting the password as the user desires, or to the
factory default. A keyboard is required to change the password from the factory default of 'agilent' or to
set a new password that contains alphabetic characters. The control is:
Description
The name (same as the remote SICL address) of the device
used when communicating with your analyzer
The unique integer assigned to your device when it is being
controlled using SICL LAN
The emulated GPIB address assigned to your transmitter
tester when it is a SICL server (the same as your GPIB
address)
System, I/O Config, SCPI LAN
All
:SYSTem:COMMunicate:LAN:SCPI:SICL:ENABle OFF|ON|0|1
:SYSTem:COMMunicate:LAN:SCPI:SICL:ENABle?
:SYST:COMM:LAN:SCPI:SICL:ENAB OFF
ON
This is unaffected by Preset, but is set to ON with a "Restore System
Defaults->Misc"
No
On | Off
Prior to A.02.00
System Functions
System
Setting
gpib7
8
18
191