40 MHz path: 250 MHz
140 MHz path: 300 MHz
Key Path
Key Path
Remote Command
Example
Preset
State Saved
Min
Max
Initial S/W Revision
I/Q
This feature is not available unless the
Selects the front-panel I/Q input ports to be the analyzer signal input. If I/Q is already selected, pressing
this key accesses the I/Q setup menu.
Key Path
Mode
Example
Notes
Input/Output, External Mixer
Input/Output, External Mixer, Calibrate Mixer
[:SENSe]:MIXer:CIFLoss <rel_ampl>
[:SENSe]:MIXer:CIFLoss?
:MIX:CIFL 0.23 DB
:MIX:CIFL?
0.26 dB
Saved in state
–1000
1000
A.08.01
"Baseband I/Q (Option BBA)" on page 414
Input/Output
BASIC, CDMA2K, EDGEGSM, TDSCMDA, VSA89601, WIMAXOFDMA
FEED AIQ
Not all measurements support the use of the I/Q signal input. When I/Q is
selected in a measurement that does not support it, the "No Result; Meas
invalid with I/Q inputs " error condition message appears. This is error 135
Input/Output
is installed.
413