Scale/Div - Agilent Technologies X Series Manual

This is only available when the selected input is IQ.
Key Path
Initial S/W Revision

Scale/Div

Sets the units per vertical graticule division on the display.
Scale/Div (Spectrum)
Sets the vertical scale in spectrum view by changing the amplitude value per division.
Key Path
Mode
Remote Command
Example
Notes
Couplings
Preset
State Saved
Min
Max
Initial S/W Revision
Scale/Div (I/Q Waveform)
Sets the vertical scale in the waveform view by changing the amplitude value per division.
Key Path
Mode
AMPTD Y Scale
Prior to A.02.00
AMPTD Y Scale
BASIC
:DISPlay:SPECtrum:VIEW[1]:WINDow[1]:TRACe:Y[:SCALe]:PDI
Vision <rel_ampl>
:DISPlay:SPECtrum:VIEW[1]:WINDow[1]:TRACe:Y[:SCALe]:PDI
Vision?
DISP:SPEC:VIEW:WIND:TRAC:Y:PDIV 10
DISP:SPEC:VIEW:WIND:TRAC:Y:PDIV?
You must be in the IQ Analyzer (Basic) mode to use this command. Use
INSTrument:SELect to set the mode.
When you set a value manually, Auto Scaling automatically changes to Off.
When Auto Scaling is turned on, this value is automatically determined by the
measurement result.
10 dB
Saved in instrument state.
0.10 dB
20 dB
Prior to A.02.00
AMPTD Y Scale
BASIC
Complex Spectrum Measurement
AMPTD Y Scale
221