Auto Scaling - Agilent Technologies X Series Manual

Complex Spectrum Measurement
AMPTD Y Scale
Remote Command
Example
Notes
Preset
State Saved
Range
Initial S/W Revision

Auto Scaling

Enables you to toggle the Auto Scaling function between On and Off. Upon pressing the Restart
front-panel key or the Restart key under the Meas Control menu, the Auto Scaling function
automatically determines the scale per division and reference values based on the measurement results.
Key Path
Mode
Remote Command
Example
Notes
Couplings
Preset
State Saved
Range
Initial S/W Revision
224
:DISPlay:SPECtrum:VIEW[1]:WINDow2:TRACe:Y[:SCALe]:RPOSi
tion TOP|CENTer|BOTTom
:DISPlay:SPECtrum:VIEW[1]:WINDow2:TRACe:Y[:SCALe]:RPOSi
tion?
DISP:SPEC:VIEW:WIND2:TRAC:Y:RPOS TOP
DISP:SPEC:VIEW:WIND2:TRAC:Y:RPOS?
You must be in the IQ Analyzer (Basic) mode to use this command. Use
INSTrument:SELect to set the mode.
CENTer
Saved in instrument state.
Top | Ctr | Bot
Prior to A.02.00
AMPTD Y Scale
BASIC
:DISPlay:SPECtrum:VIEW[1]:WINDow[1]|2:TRACe:Y[:SCALe]:C
OUPle ON|OFF|1|0
:DISPlay:SPECtrum:VIEW[1]:WINDow[1]|2:TRACe:Y[:SCALe]:C
OUPle?
DISP:SPEC:VIEW:WIND2:TRAC:Y:COUP 0
You must be in the IQ Analyzer (Basic) mode to use this command. Use
INSTrument:SELect to set the mode.
When you set a value to either Scale/Div or Ref Value manually, Auto Scaling
automatically changes to Off.
When this value is turned on, Ref Value and Scale/Div are automatically
determined by the measurement result.
OFF
Saved in instrument state.
On | Off
Prior to A.02.00