Selecting Scpi Language Compatibility Mode As The Power-On Application - Agilent Technologies X Series User Manual

NOTE
To select the SCPI Language Compatibility mode as the power-on application, press the
hardkey on the X-Series analyzer front panel and then select the
than six modes on the signal analyzer, then use the More button to find the
Figure 2-2
Figure 2-2
This Manual:http://www.manuallib.com/agilent/n9062a-signal-analyzer-user-guide.html

Selecting SCPI Language Compatibility Mode as the Power-on Application

Selecting SCPI Language Compatibility Mode as the
Power-on Application
Option N9062A-2FP or W9062A-2FP is required to use the SCPI Language
Compatibility mode.
is an example showing the power-on application setup.
Example Power On Mode Menu Map for X-Series Analyzers
Front Panel Operations
System
, . If there are more
Power On SCPILC
mode selection.
SCPILC
29