All Markers Off; Backward Compatibility Scpi Commands - Agilent Technologies X Series Manual

Initial S/W Revision
Modified at S/W Revision

All Markers Off

Turns off all markers.
Key Path
Mode
Remote Command
Example
Notes
Initial S/W Revision
Modified at S/W Revision

Backward Compatibility SCPI Commands

Sets or queries the state of a marker. Setting a marker which is OFF to state ON or 1 puts it in Normal
mode and places it at the center of the screen.
Mode
Remote Command
Example
Notes
Preset
State Saved
Range
Initial S/W Revision
Modified at S/W Revision
Prior to A.02.00
A.03.00
Marker
BASIC, PN, WCDMA, C2K, GSM, WIMAX OFDMA, TD-SCDMA,
1xEV-DO, DVB-T/H, DTMB (CTTB), ISDB-T, CMMB, LTE, LTETDD,
Digital Cable TV
:CALCulate:WAVeform:MARKer:AOFF
CALC:WAV:MARK:AOFF
You must be in a mode that includes the Waveform measurement to use this
command. Use INSTrument:SELect to set the mode.
Prior to A.02.00
A.03.00
BASIC, PN, WCDMA, C2K, GSM, WIMAX OFDMA, TD-SCDMA,
1xEV-DO, DVB-T/H, DTMB (CTTB), ISDB-T, CMMB, LTE, LTETDD,
Digital Cable TV
:CALCulate:WAVeform:MARKer[1]|2|3|4|5|6|7|8|9|10|11|12:
STATe OFF|ON|0|1
:CALCulate:WAVeform:MARKer[1]|2|3|4|5|6|7|8|9|10|11|12:
STATe?
CALC:WAV:MARK:STAT ON
CALC:WAV:MARK:STAT?
You must be in a mode that includes the Waveform measurement to use this
command. Use INSTrument:SELect to set the mode.
OFF
Saved in instrument state.
On|Off
Prior to A.02.00
A.03.00
Waveform Measurement
Marker
311