Restore Defaults - Agilent Technologies X Series Manual

Adjusting the Center Freq of any mode which supports Global Settings, while
, will modify the Global Center Frequency.
On
When
Global Center Freq
Center Freq of each mode is once again independent.
When Mode Preset is pressed while
preset Center Freq of the current mode.
This function is reset to Off when the Restore Defaults key is pressed in the Global Settings menu, or
when ,
System

Restore Defaults

Key Path
Scope
Remote Command
Example
Preset
Range
Initial S/W Revision
Remote Command
Preset
Initial S/W Revision
Restore Defaults
This key resets all of the functions in the Global Settings menu to Off. This also occurs when
,
Restore Defaults All Modes
Key Path
Remote Command
Example
Backwards Compatibility SCPI
Initial S/W Revision
is turned , the Center Freq of the current mode is unchanged, but now the
Off
Global Center Freq
, is pressed.
All Modes
Mode Setup, Global Settings
Mode Global
:INSTrument:COUPle:FREQuency:CENTer ALL|NONE
:INSTrument:COUPle:FREQuency:CENTer?
INST:COUP:FREQ:CENT ALL
INST:COUP:FREQ:CENT?
Set to Off on Global Settings, Restore Defaults
and System, Restore Defaults, All Modes
On|Off
Prior to A.02.00
:GLOBal:FREQuency:CENTer[:STATe] 1|0|ON|OFF
:GLOBal:FREQuency:CENTer[:STATe]?
Off
Prior to A.02.00
is pressed.
Mode Setup, Global Settings
:INSTrument:COUPle:DEFault
INST:COUP:DEF
:GLOBal:DEFault
Prior to A.02.00
Global Center Freq
is On , the Global Center Freq is preset to the
Mode
is
,
System
515