Properties - Agilent Technologies X Series Manual

Backwards Compatibility SCPI
Initial S/W Revision

Properties

Accesses a menu used to set certain properties of the selected marker.
Key Path
Initial S/W Revision
Select Marker
Displays 12 markers available for selection.
Key Path
Initial S/W Revision
Relative To
Selects the marker relative to its reference marker.
Key Path
Mode
Remote Command
Example
Notes
Preset
State Saved
Min
Max
Initial S/W Revision
:CALCulate:SPECtrum:MARKer[1]|2|3|4|5|6|7|8|9|10|11|12:FUNCtion:RESu
lt?
Prior to A.02.00
Marker
Prior to A.02.00
Marker, Properties
Prior to A.02.00
Marker, Properties
BASIC
:CALCulate:SPECtrum:MARKer[1]|2|3|4|5|6|7|8|9|10|11|12:
REFerence <integer>
:CALCulate:SPECtrum:MARKer[1]|2|3|4|5|6|7|8|9|10|11|12:
REFerence?
CALC:SPEC:MARK6:REF 8
CALC:SPEC:MARK:REF?
A marker cannot be relative to itself so that choice is grayed out, and if sent
from SCPI generates error –221: "Settings conflict; marker cannot be relative
to itself."
When queried a single value is returned (the specified marker numbers
relative marker).
2|3|4|5|6|7|8|9|10|11|12|1
Saved in instrument state.
1
12
Prior to A.02.00
Complex Spectrum Measurement
Marker
233