Application Identification (Remote Commands Only) - Agilent Technologies X Series Manual

Application Identification (Remote Commands Only)

Each entry in the Mode Menu will have a Model Number and associated information: Version, and
Options.
This information is displayed in the Show System screen. The corresponding SCPI remote commands
are defined here.
Current Application Model
Returns a string that is the Model Number of the currently selected application (mode).
Remote Command
Example
Notes
Preset
State Saved
Initial S/W Revision
Current Application Revision
Returns a string that is the Revision of the currently selected application (mode).
Remote Command
Example
Notes
Preset
State Saved
Initial S/W Revision
:SYSTem:APPLication[:CURRent][:NAME]?
:SYST:APPL?
Query returns a quoted string that is the Model Number of the currently
selected application (Mode). Example:
"N9060A"
String length is 6 characters.
Not affected by Preset
Not saved in state, the value will be the selected application when a Save is
done.
Prior to A.02.00
:SYSTem:APPLication[:CURRent]:REVision?
:SYST:APPL:REV?
Query returns a quoted string that is the Revision of the currently selected
application (Mode). Example:
"1.0.0.0"
String length is a maximum of 23 characters. (each numeral can be an integer
+ 3 decimal points)
Not affected by a Preset
Not saved in state, the value will be the selected application when a Save is
done.
Prior to A.02.00
Mode
501