Marker X Axis Position (Remote Command Only) - Agilent Technologies X Series Manual

Preset
Preset
State Saved
Min
Max
Initial S/W Revision
Modified at S/W Revision

Marker X Axis Position (Remote Command Only)

Sets the marker X position in trace points. It has no effect if the control mode is
equivalent of entering a value if the control mode is
translated into the current X Axis Scale units for setting the value of the marker.
Mode
Remote Command
Example
Notes
Preset
Preset
State Saved
Min
Max
Initial S/W Revision
Modified at S/W Revision
0
After a preset, all markers are turned OFF, so Marker X Axis Value query
returns a not a number (NAN).
No
–9.9E+37
9.9E+37
Prior to A.02.00
A.03.00
Normal
BASIC, PN, WCDMA, C2K, GSM, WIMAX OFDMA, TD-SCDMA,
1xEV-DO, DVB-T/H, DTMB (CTTB), ISDB-T, CMMB, LTE, LTETDD,
Digital Cable TV
:CALCulate:WAVeform:MARKer[1]|2|3|4|5|6|7|8|9|10|11|12:
X:POSition <real>
:CALCulate:WAVeform:MARKer[1]|2|3|4|5|6|7|8|9|10|11|12:
X:POSition?
CALC:WAV:MARK:X:POS 500
CALC:WAV:MARK:X:POS?
The query returns the marker's absolute X Axis value in trace points if the
control mode is or the offset from the marker's reference marker in
Normal
trace points if the control mode is
number, not an integer, corresponding to the translation from X Axis Scale
units to trace points.
You must be in a mode that includes the Waveform measurement to use this
command. Use INSTrument:SELect to set the mode.
0
After a preset, all markers are turned OFF, so Marker X Axis Value query
returns a not a number (NAN).
No
–9.9E+37
9.9E+37
Prior to A.02.00
A.03.00
Waveform Measurement
Off,
or Delta . The entered value is immediately
. The value is returned as a real
Delta
Marker
but is the SCPI
307