Ref Position - Agilent Technologies X Series Manual

Waveform Measurement
Span X Scale
Mode
Remote Command
Example
Notes
Couplings
Preset
State Saved
Min
Max
Initial S/W Revision
Modified at S/W Revision

Ref Position

Sets the reference position for the X axis to Left, Center or Right.
Key Path
Mode
Remote Command
Example
Notes
Preset
340
BASIC, PN, WCDMA, C2K, GSM, WIMAX OFDMA, TD-SCDMA,
1xEV-DO, DVB-T/H, DTMB (CTTB), ISDB-T, CMMB, LTE, LTETDD,
Digital Cable TV
:DISPlay:WAVeform:VIEW[1]|2:WINDow[1]:TRACe:X[:SCALe]:P
DIVision <time>
:DISPlay:WAVeform:VIEW[1]|2:WINDow[1]:TRACe:X[:SCALe]:P
DIVision?
DISP:WAV:VIEW:WIND:TRAC:X:PDIV 500 us
DISP:WAV:VIEW:WIND:TRAC:X:PDIV?
You must be in a mode that includes the Waveform measurement to use this
command. Use INSTrument:SELect to set the mode.
If Auto Scaling is set to On, this value is automatically determined by the
measurement result. When you set this value manually, Auto Scaling
automatically changes to Off.
200.0 us
Saved in instrument state.
1.000 ns
1.000 s
Prior to A.02.00
A.03.00
SPAN X Scale
BASIC, PN, WCDMA, C2K, GSM, WIMAX OFDMA, TD-SCDMA,
1xEV-DO, DVB-T/H, DTMB (CTTB), ISDB-T, CMMB, LTE, LTETDD,
Digital Cable TV
:DISPlay:WAVeform:VIEW[1]|2:WINDow[1]:TRACe:X[:SCALe]:R
POSition LEFT|CENTer|RIGHt
:DISPlay:WAVeform:VIEW[1]|2:WINDow[1]:TRACe:X[:SCALe]:R
POSition?
DISP:WAV:VIEW:WIND:TRAC:X:RPOS LEFT
DISP:WAV:VIEW:WIND:TRAC:X:RPOS?
Allows you to set the reference position to Left, Ctr (center) or Right.
You must be in a mode that includes the Waveform measurement to use this
command. Use INSTrument:SELect to set the mode.
LEFT