Advanced - Agilent Technologies X Series Manual

Couplings
Readback
Initial S/W Revision

Advanced

Accesses a menu of advanced functions that are used for specific applications. These settings should not
be changed for most measurements.
Key Path
Initial S/W Revision
ADC Dither
Accesses the ADC Dither control menu.
Key Path
Initial S/W Revision
ADC Dither Auto
Sets ADC dithering to automatically select whether dithering is needed.
Key Path
Mode
Remote Command
Example
The frequency below which the phase noise is optimized is model dependent:
CXA: n/a
EXA: [offset >150 kHz]
MXA: [offset >150 kHz]
PXA: [offset >400 kHz]
Wide-offset.
If manually selected, "Man" will be underlined. The actual frequency offset
beyond which noise is optimized is shown with in square brackets, as this can
vary depending on the hardware set in use. For example, in some analyzers
this annotation appears as [offset >150 kHz]
Prior to A.07.00
Meas Setup
Prior to A.02.00
Meas Setup, Advanced
Prior to A.02.00
Meas Setup, Advanced, ADC Dither
BASIC, PN, WCDMA, C2K, GSM, WIMAX OFDMA, TD-SCDMA,
1xEV-DO, DVB-T/H, DTMB (CTTB), ISDB-T, CMMB, LTE, LTETDD,
Digital Cable TV
[:SENSe]:WAVeform:ADC:DITHer:AUTO[:STATe] OFF|ON|0|1
[:SENSe]:WAVeform:ADC:DITHer:AUTO[:STATe]?
WAV:ADC:DITH:AUTO ON
WAV:ADC:DITH:AUTO?
Waveform Measurement
Meas Setup
325