Marker Y Axis Value (Remote Command Only); Properties - Agilent Technologies X Series Manual

Waveform Measurement
Marker

Marker Y Axis Value (Remote Command Only)

Queries the marker Y Axis value in the current marker Y Axis unit.
Mode
Remote Command
Example
Notes
Preset
State Saved
Backwards Compatibility SCPI
Initial S/W Revision
Modified at S/W Revision

Properties

Accesses the marker properties menu.
Key Path
Initial S/W Revision
Select Marker
Displays 12 markers available for selection.
Key Path
308
BASIC, PN, WCDMA, C2K, GSM, WIMAX OFDMA, TD-SCDMA,
1xEV-DO, DVB-T/H, DTMB (CTTB), ISDB-T, CMMB, LTE, LTETDD,
Digital Cable TV
:CALCulate:WAVeform:MARKer[1]|2|3|4|5|6|7|8|9|10|11|12:
Y?
CALC:WAV:MARK11:Y?
When the marker is on, IQ waveform returns I and Q values.
Case #1 - Trace RF, I or Q: returns a single double value.
>:CALC:WAV:MARK1:Y?
–2.402406506109E+001
Case #2 - Trace IQ: returns a double array of two values, the first is I, and the
second is Q.
>:CALC:WAV:MARK1:Y?
–3.006944493834E–003,+9.9870666467354E–004
The IQ selection is for backward compatibility purposes. It is recommended
that the users use the I and/or Q selection instead.
You must be in a mode that includes the Waveform measurement to use this
command. Use INSTrument:SELect to set the mode.
Result dependant on the marker setup and signal source.
No
:CALCulate:WAVeform:MARKer[1]|2|3|4|5|6|7|8|9|10|11|12:FUNCtion:RESu
lt?
Prior to A.02.00
A.03.00
Marker
Prior to A.02.00
Marker