Restore Defaults - Agilent Technologies X Series Manual

Restore Defaults

Provides incremental initialization of the system setting groups along with supporting a comprehensive
reset of the entire instrument back to a factory default state. The menu selections are the groups of
system settings and when one is selected, that particular group of system settings is reset back to their
default values.
Key Path
Mode
Remote Command
Example
State Saved
Initial S/W Revision
Restore Input/Output Defaults
Causes the group of settings and data associated with Input/Output front-panel key to be a reset to their
default values. This level of Restore System Defaults does not affect any other system settings, mode
settings and does not cause a mode switch..
Confirmation is required to restore the Input/Output setting. The confirmation dialog is:
Key Path
Example
Initial S/W Revision
Restore Power On Defaults
This selection causes the Power On settings to be a reset to their default value. This level of Restore
System Defaults does not affect any other system settings, mode settings and does not cause a mode
switch. The Power On settings and their default values are Power On Type reset to Mode and
Input/Output Defaults and Power On Application reset to whatever the factory set as its default value.
System
All
:SYSTem:DEFault [ALL]|ALIGn|INPut|MISC|MODes|PON
SYST:DEF
No
Prior to A.02.00
System, Restore System Defaults
:SYST:DEF INP
Prior to A.02.00
System Functions
System
195