Example
Couplings
Preset
State Saved
Min
Max
Default Unit
Meas Preset
Restores all the measurement parameters to their default values.
Key Path
Mode
Remote Command
Example
Notes
Initial S/W Revision
Modified at S/W Revision
WAV:IF:GAIN:OFFS 2
Sets the IF Gain offset to 2
If the IF Path Selection is 10 MHz or 25 MHz, then this feature is not
available and is grayed out.
0
Saved in instrument state.
–6
+6
dB
Meas Setup
BASIC, PN, WCDMA, C2K, GSM, WIMAX OFDMA, TD-SCDMA,
1xEV-DO, DVB-T/H, DTMB (CTTB), ISDB-T, CMMB, LTE, LTETDD,
Digital Cable TV
:CONFigure:WAVeform
CONF:WAV
Restore default values of all parameters.
You must be in a mode that includes the Waveform measurement to use this
command. Use INSTrument:SELect to set the mode.
Prior to A.02.00
A.03.00
Waveform Measurement
Meas Setup
329