Meas; Remote Measurement Functions - Agilent Technologies X Series Manual

Meas

The information in this section is common to all measurements. For key and remote command
information for a specific measurement, refer to the section that describes the measurement of interest.
Measurements available under the Meas key are specific to the current Mode.
When viewing Help for measurements, note the following:
Operation for some keys differs between measurements. The information
NOTE
displayed in Help pertains to the current measurement. To see how a key operates
in a different measurement, exit Help (press the Cancel Esc key), select the
measurement, then reenter Help (press the Help key) and press that key.
Key Path
Initial S/W Revision

Remote Measurement Functions

This section contains the following topics:
"Measurement Group of Commands" on page 484
"Current Measurement Query (Remote Command Only) " on page 486
"Limit Test Current Results (Remote Command Only)" on page 487
"Data Query (Remote Command Only)" on page 487
"Calculate/Compress Trace Data Query (Remote Command Only)" on page 487
"Calculate Peaks of Trace Data (Remote Command Only)" on page 493
"Format Data: Numeric Data (Remote Command Only)" on page 494
"Format Data: Byte Order (Remote Command Only)" on page 496
Initial S/W Revision
Front-panel key
Prior to A.02.00
Prior to A.02.00
Meas
483