Agilent Technologies X Series Manual page 505

Initial S/W Revision
W-CDMA with HSPA+
Selects the W-CDMA with HSPA+ mode for general purpose measurements of signals following this
standard. There are several measurements available in this mode.
If you are using the Help feature, this mode must be currently active to access its detailed information. If
it is not active, exit the Help feature (Esc key), select the mode, and re-access Help.
Key Path
Example
Initial S/W Revision
GSM/EDGE/EDGE Evo
Selects the GSM with EDGE mode for general purpose measurements of signals following this standard.
There are several measurements available in this mode.
If you are using the Help feature, this mode must be currently active to access its detailed information. If
it is not active, exit the Help feature (Esc key), select the mode, and re-access Help.
Key Path
Example
Initial S/W Revision
Modified at S/W Revision
802.16 OFDMA (WiMAX/WiBro)
Selects the OFDMA mode for general purpose measurements of WiMAX signals. There are several
measurements available in this mode.
If you are using the Help feature, this mode must be currently active to access its detailed information. If
it is not active, exit the Help feature (Esc key), select the mode, and re-access Help.
Key Path
Example
Initial S/W Revision
Prior to A.02.00
Mode
INST:SEL WCDMA
INST:NSEL 9
Prior to A.02.00
Mode
INST:SEL EDGEGSM
INST:NSEL 13
Prior to A.02.00
A.02.00
Mode
INST:SEL WIMAXOFDMA
INST:NSEL 75
Prior to A.02.00
Mode
505