Flattop Filters
200 kHz
220 kHz
300 kHz
330 kHz
510 kHz
620 kHz
1.5 MHz
3.0 MHz
6 MHz
8 MHz
Filter BW
This feature is only available with PXA or when Option B40 is installed.
Key Path
Mode
Remote Command
Example
Notes
Dependencies
Couplings
Preset
State Saved
Min
Max
Initial S/W Revision
240 kHz
270 kHz
390 kHz
430 kHz
750 kHz
1.0 MHz
4 MHz
5 MHz
BW
BASIC
[:SENSe]:WAVeform:DIF:FILTer:BANDwidth <freq>
[:SENSe]:WAVeform:DIF:FILTer:BANDwidth?
[:SENSe]:WAVeform:DIF:FILTer:BANDwidth:AUTO ON|OFF|1|0
[:SENSe]:WAVeform:DIF:FILTer:BANDwidth:AUTO?
WAV:DIF:FILT:BAND 1MHz
WAV:DIF:FILT:BAND?
WAV:DIF:FILT:BAND:AUTO 0
WAV:DIF:FILT:BAND:AUTO?
You must be in the IQ Analyzer (Basic) mode to use this command. Use
INSTrument:SELect to set the mode.
This feature is only available with PXA or when Option B40 is installed.
Sets the same value as the current Digital IF BW value upon a preset or when
Channel Filter Bandwidth Auto is ON.
Same value as Digital IF BW
ON
Saved in instrument state.
10 Hz
Clipped to the current Digital IF BW value.
A.04.00
Waveform Measurement
BW
299