Screen Image - Agilent Technologies X Series Manual

While the save is being performed, the floppy icon will show up in the settings bar near the
Continuous/Single icon. After a register save completes, the corresponding register softkey annotation is
updated with the date the time and an advisory message that the file was saved appears in the message
bar.
Key Path
Notes
Initial S/W Revision

Screen Image

Accesses a menu of functions that enable you to specify a format and location for the saved screen
image.
Pressing Screen Image brings up a menu that allows you to specify the color scheme of the Screen Image
(Themes) or navigate to the Save As dialog to perform the actual save.
Screen Image files contain an exact representation of the analyzer display. They cannot be loaded back
onto the analyzer, but they can be loaded into your PC for use in many popular applications.
The image to be saved is actually captured when the
temporary storage to be used if you ask for a Screen Image save. When the Screen Image key is pressed,
a "thumbnail" of the captured image is displayed, as shown below:
Save, Data, Save As...
If the file already exists, the file will be overwritten. Using the C: drive is
strongly discouraged, since it runs the risk of being overwritten during a
instrument software upgrade. Both single and double quotes are supported for
any filename parameter over remote.
Prior to A.02.00
Save
front panel key is pressed, and kept in
System Functions
Save
137