Using The Electronic Attenuator Hardware; (Option Ea3) - Agilent Technologies X Series Manual

About the IQ Analyzer Measurement Application
Using the Electronic Attenuator Hardware (Option EA3)

Using the Electronic Attenuator Hardware

(Option EA3)

Option EA3 is required for many of the optional measurement personalities. This optional attenuator does the
fast switching necessary to accommodate the complicated multiple-sweep, averaged measurements required for
digital communication systems testing. The hardware is specified for measurements up to a maximum of 3.6
GHz and works with many different measurement personalities. These additional measurement personalities are
purchased separately and are accessed using the
for information about loading measurement instrument software.
94
key. See "Installing Application Software" on page 68
Mode
Chapter 3