Agilent Technologies X Series Manual page 374

AMPTD Y Scale
V
Sets the amplitude unit for the selected amplitude scale (log/lin) to volt.
Key Path
Example
Dependencies
Readback
Initial S/W Revision
Modified at S/W Revision
A
Sets the amplitude unit for the selected amplitude scale (log/lin) to Ampere.
Key Path
Example
Dependencies
Readback
Initial S/W Revision
Modified at S/W Revision
dBμV
Sets the amplitude unit for the selected amplitude scale (log/lin) to dBμV.
Key Path
Example
Dependencies
Readback
Initial S/W Revision
Modified at S/W Revision
dBμA
Sets the amplitude unit for the selected amplitude scale (log/lin) to dBμA.
Key Path
Example
Dependencies
374
AMPTD Y Scale, Y Axis Unit
UNIT:POW V
Grayed out if an Amplitude Correction with an Antenna Unit is ON.
V
Prior to A.02.00
A.02.00
AMPTD Y Scale, Y Axis Unit
UNIT:POW A
Grayed out if an Amplitude Correction with an Antenna Unit is ON.
A
Prior to A.02.00
A.02.00
AMPTD Y Scale, Y Axis Unit
UNIT:POW DBUV
Grayed out if an Amplitude Correction with an Antenna Unit is ON.
dBμV
Prior to A.02.00
A.02.00
AMPTD Y Scale, Y Axis Unit
UNIT:POW DBUA
Grayed out if an Amplitude Correction with an Antenna Unit is ON.