Alignments - Agilent Technologies X Series Manual

System Functions
System
Restore Power On Defaults
This selection causes the Power On Type and Power On Application settings to be a reset to their default
values. This level of Restore System Defaults does not affect any other system settings, mode settings
and does not cause a mode switch. The Power On key, under the Restore System Defaults menu, causes
the same action.
If you press any key other than OK or Enter, it is construed as a Cancel, because the only path that will
actually cause the reset to be executed is through OK or Enter.
Key Path
Example
Initial S/W Revision

Alignments

The Alignments Menu controls and displays the automatic alignment of the instrument, and provides the
ability to restore the default alignment values.
The current setting of the alignment system is displayed in the system Settings Panel along the top of the
display, including a warning icon for conditions that may cause specifications to be impacted.
Key Path
Initial S/W Revision
Auto Align
Configures the method for which the automatic background alignment is run.
Automatic background alignments are run periodically between measurement acquisitions. The
instrument's software determines when alignments are to be performed to maintain warranted operation.
The recommended setting for Auto Align is Normal.
An Auto Align execution cannot be aborted with the Cancel (ESC) key. To interrupt an Auto Align
execution, select
Auto Align Off
160
System, Power On
:SYST:DEF PON
Prior to A.02.00
System
Prior to A.02.00
.