Meas Time; Phnoise Opt - Agilent Technologies X Series Manual

Waveform Measurement
Meas Setup
Notes
Couplings
Preset
Min
Max

Meas Time

Sets how long the measurement is performed. X Scale only changes the representation of the display.
Key Path
Mode
Remote Command
Example
Notes
Preset
State Saved
Range
Initial S/W Revision
Modified at S/W Revision

PhNoise Opt

Selects the LO (local oscillator) phase noise behavior for various desired operating conditions.
Key Path
Remote Command
322
Query only.
Coupled to Sample Rate by the following equation.
Sample Period = 1/(Sample Rate)
1/(Sample Rate Default)
1/(Max Sample Rate)
1/(Min Sample Rate)
Meas Setup
BASIC, PN, WCDMA, C2K, GSM, WIMAX OFDMA, TD-SCDMA,
1xEV-DO, DVB-T/H, DTMB (CTTB), ISDB-T, CMMB, LTE, LTETDD,
Digital Cable TV
[:SENSe]:WAVeform:SWEep:TIME <time>
[:SENSe]:WAVeform:SWEep:TIME?
WAV:SWE:TIME 50 ms
WAV:SWE:TIME?
Specifies and returns how long the measurement is performed. It is the time
record length of the measurement waveform. The Max time may be reduced
when the sample frequency is high due to the memory limitation.
You must be in a mode that includes the Waveform measurement to use this
command. Use INSTrument:SELect to set the mode.
2.000000 ms
Saved in instrument state.
1.000 (s to 100.00 s
Prior to A.02.00
A.03.00
Meas Setup
[:SENSe]:WAVeform:FREQuency:SYNThesis[:STATe] 1|2|3
[:SENSe]:WAVeform:FREQuency:SYNThesis[:STATe]?