Range; Scale/Div - Agilent Technologies X Series Manual

Range

Accesses a menu that enables you to change the baseband I/Q gain settings. This key has a readback text
that describes gain range value. For more information, refer to
Key Path
Initial S/W Revision

Scale/Div

Sets the units per division of vertical scale in the logarithmic display. However, since Auto Scaling is
defaulted to On, this value is automatically determined by the measurement result. When you set a value
manually, Auto Scaling automatically changes to Off.
Scale/Div (RF Envelope View)
Sets the scale per division for the RF Envelope result waveform (time domain) measurements in the
graph window.
Key Path
Mode
Remote Command
Example
Notes
Couplings
Preset
State Saved
Range
Initial S/W Revision
Modified at S/W Revision
AMPTD Y Scale
Prior to A.02.00
AMPTD Y Scale
BASIC, PN, WCDMA, C2K, GSM, WIMAX OFDMA, TD-SCDMA,
1xEV-DO, DVB-T/H, DTMB (CTTB), ISDB-T, CMMB, LTE, LTETDD,
Digital Cable TV
:DISPlay:WAVeform:VIEW[1]:WINDow[1]:TRACe:Y[:SCALe]:PDI
Vision <rel_ampl>
:DISPlay:WAVeform:VIEW[1]:WINDow[1]:TRACe:Y[:SCALe]:PDI
Vision?
DISP:WAV:VIEW:WIND:TRAC:Y:PDIV 5
DISP:WAV:VIEW:WIND:TRAC:Y:PDIV?
You must be in a mode that includes the Waveform measurement to use this
command. Use INSTrument:SELect to set the mode.
When Auto Scaling is On, this value is automatically determined by the
measurement result.
When you set a value manually, Auto Scaling automatically changes to Off.
10.00 dB
Saved in instrument state.
0.10 dB to 20.00 dB
Prior to A.02.00
A.03.00
Waveform Measurement
"AMPTD Y Scale" on page
AMPTD Y Scale
351.
283