Marker Function; Select Marker; Marker Function Type - Agilent Technologies X Series Manual

Waveform Measurement

Marker Function

Marker Function
Accesses a menu of marker functions that perform post-processing operations on markers based on the
measurement specifications. Marker functions are distinct from measurement functions, which
automatically perform complex sequences of setup, data acquisition, and display operations in order to
measure specified signal characteristics. Marker Functions are specified for each individual marker and
may be turned on individually for each marker.
The menu controls which marker functions are turned on and allows you to adjust the
Marker Function
setup parameters for each function. These parameters include the following, but only one parameter can
be assigned to a given marker:
• Marker Noise
• Band/Interval Power
• Band/Interval Density
• Marker Function Off
Key Path
Initial S/W Revision

Select Marker

Displays 12 markers available for selection.
Key Path
Initial S/W Revision

Marker Function Type

Sets the marker control function type to, Marker Noise, Band/Interval Power, Band Interval Density, or
Marker Function Off
Key Path
Mode
Remote Command
Example
312
Front-panel key
Prior to A.02.00
Marker
Prior to A.02.00
Marker Function
BASIC, PN, WCDMA, C2K, GSM, WIMAX OFDMA, TD-SCDMA,
1xEV-DO, DVB-T/H, DTMB (CTTB), ISDB-T, CMMB, LTE, LTETDD,
Digital Cable TV
:CALCulate:WAVeform:MARKer[1]|2|3|4|5|6|7|8|9|10|11|12:
FUNCtion BPOWer|BDENsity|OFF
:CALCulate:WAVeform:MARKer[1]|2|3|4|5|6|7|8|9|10|11|12:
FUNCtion?
CALC:WAV:MARK:FUNC BPOW
CALC:WAV:MARK:FUNC?