Detailed List Of Modes - Agilent Technologies X Series Manual

Mode

Detailed List of Modes

Spectrum Analyzer
Selects the Spectrum Analyzer mode for general purpose measurements. There are several
measurements available in this mode. General spectrum analysis measurements, in swept and zero span,
can be done using the first key in the Meas menu, labeled Swept SA. Other measurements in the Meas
Menu are designed to perform specialized measurement tasks, including power and demod
measurements.
If you are using the Help feature, this mode must be currently active to access its detailed information. If
it is not active, exit the Help feature (Esc key), select the mode, and re-access Help.
Key Path
Example
Initial S/W Revision
EMI Receiver
The EMI Receiver Mode makes EMC measurements. Several measurements are provided to aid the user
in characterizing EMC performance of their systems, including looking at signals with CISPR–16
compliant detectors, performing scans for interfering signals, and determining and charting interfering
signals over time.
If you are using the Help feature, this mode must be currently active to access its detailed information. If
it is not active, exit the Help feature (Esc key), select the mode, and re-access Help.
Key Path
Example
Initial S/W Revision
IQ Analyzer (Basic)
The IQ Analyzer Mode makes general purpose frequency domain and time domain measurements. These
measurements often use alternate hardware signal paths when compared with a similar measurement in
the Signal Analysis Mode using the Swept SA measurement. These frequency domain and time domain
measurements can be used to output I/Q data results when measuring complex modulated digital signals.
If you are using the Help feature, this mode must be currently active to access its detailed information. If
it is not active, exit the Help feature (Esc key), select the mode, and re-access Help.
Key Path
Example
504
Mode
INST:SEL SA
INST:NSEL 1
Prior to A.02.00
Mode
INST:SEL EMI
INST:NSEL 141
A.07.01
Mode
INST:SEL BASIC
INST:NSEL 8