Couplings
Initial S/W Revision
Save User Preset
Saves the currently active mode and its State. You can recall this User Preset file by pressing the User
Preset menu key or sending the SYST:PRES:USER remote command. This same state is also saved by
the Save State function.
Key Path
Remote Command
Example
Notes
Initial S/W Revision
A user preset will cause the currently running measurement to be aborted,
cause a mode switch to the power-on mode, and cause the saved measurement
to be active in the power-on mode. Recalling a User Preset file has the same
issues that recalling a Save State file has. Some settings may need to be
limited and therefore re-coupled, since the capabilities of the mode may have
changes when the User Preset file was last saved.
Prior to A.02.00
User Preset
:SYSTem:PRESet:USER:SAVE
:SYST:PRES:USER:SAVE
:SYST:PRES:SAVE creates the same file as if the user requested a *SAV or a
MMEM: STOR:STAT, except User Preset Save does not allow the user to
specify the filename or the location of the file.
Prior to A.02.00
System Functions
User Preset
213