File Open Dialog And Menu - Agilent Technologies X Series Manual

System Functions
Recall
Mode
Notes
Dependencies
Preset
Readback
Initial S/W Revision
Open...
Accesses the standard Windows File Open dialog and the File Open key menu. When you navigate to
this selection, you have already determined you are recalling a specific Data Type and now you want to
specify which file to open.
When you first enter this dialog, the path in the Look In: field depends on which import data type you
selected.
The only files that are visible are those specific to the file type being recalled.
Key Path
Notes
Initial S/W Revision
Open
The import starts by checking for errors. Then the import can start. For all data types, the actual import
starts by aborting the currently running measurement. Then the import does data type specific behavior:

File Open Dialog and Menu

The File Open is a standard Windows dialog and has a File Open key menu. Each key in this menu
corresponds to the selectable items in the File Open dialog box. The menu keys can be used for easy
navigation between the selections within the dialog or the standard
dialog navigation. When you navigate to this selection, you have already limited the file recall type and
now you want to specify which file to open.
Initial S/W Revision
124
All
The menu is built from whatever data types are available for the mode. Some
keys will be missing completely, so the key locations in the sub-menu will
vary.
No SCPI command directly controls the Data Type that this key controls. The
Data Type is included in the MMEM:LOAD commands.
If a file type is not used by a certain measurement, it is grayed out for that
measurement. The key for a file type will not show at all if there are no
measurements in the Mode that support it.
Is not affected by Preset or shutdown, but is reset during Restore Mode
Defaults
The data type that is currently selected
Prior to A.02.00
Recall, Data
The key location is mode-dependent and will vary.
Brings up Open dialog for recalling a <mode specific> Save Type
Prior to A.02.00
Prior to A.02.00
and keys can be used for
Tab Arrow