Marker X Axis Value (Remote Command Only) - Agilent Technologies X Series Manual

Waveform Measurement
Marker
Notes
Preset
State Saved
Range
Initial S/W Revision
Modified at S/W Revision

Marker X Axis Value (Remote Command Only)

Sets the marker X Axis value in the current marker X Axis Scale unit. It has no effect if the control mode
is but is the SCPI equivalent of entering an X value if the control mode is
Off,
Mode
Remote Command
Example
Notes
306
If the selected marker is Off, pressing Marker sets it to Normal and places it at
the center of the screen on the trace determined by the
the same time, Marker X Axis Value
Default Active Function: the active function for the selected marker's current
control mode. If the current control mode is Off, there is no active function
and the active function is turned off.
Active Function Display: the marker X axis value entered in the active
function area displays the marker value to its full entered precision.
You must be in a mode that includes the Waveform measurement to use this
command. Use INSTrument:SELect to set the mode.
OFF
Saved in instrument state.
Normal|Delta|Off
Prior to A.02.00
A.03.00
BASIC, PN, WCDMA, C2K, GSM, WIMAX OFDMA, TD-SCDMA,
1xEV-DO, DVB-T/H, DTMB (CTTB), ISDB-T, CMMB, LTE, LTETDD,
Digital Cable TV
:CALCulate:WAVeform:MARKer[1]|2|3|4|5|6|7|8|9|10|11|12:
X <time>
:CALCulate:WAVeform:MARKer[1]|2|3|4|5|6|7|8|9|10|11|12:
X?
CALC:WAV:MARK:X 50 ms
CALC:WAV:MARK:X?
If no suffix is sent, uses the fundamental units for the current marker X Axis
Scale. If a suffix is sent that does not match the current marker X Axis Scale
unit, an error "Invalid suffix" is generated. If the specified marker is Fixed and
a Marker Function is on, error –221 "Settings conflict; cannot adjust Fixed
marker while Marker Function is on" is generated.
The query returns the marker's absolute X Axis value if the control mode is
Normal , or the offset from the marker's reference marker if the control mode
is Delta . The query is returned in the fundamental units for the current marker
X Axis scale: Hz for
Frequency
. If the marker is
Time Off
You must be in a mode that includes the Waveform measurement to use this
command. Use INSTrument:SELect to set the mode.
appears on the Active Function area.
Normal
and , seconds for
Inverse Time
the response is not a number.
rules. At
Marker Trace
or .
Delta
and
Period