Span X Scale; Ref Value; Scale/Div - Agilent Technologies X Series Manual

Span X Scale

Accesses a menu of functions that enable you to set the horizontal scale parameters.
Key Path
Initial S/W Revision

Ref Value

Sets the reference value for time on the horizontal axis. When Auto Scaling is set to On, the displayed
plots use a Scale/Div value determined by the analyzer, based on the measurement result.
Key Path
Mode
Remote Command
Example
Notes
Couplings
Preset
State Saved
Min
Max
Initial S/W Revision
Modified at S/W Revision

Scale/Div

Sets the horizontal scale by changing a time value per division.
Key Path
Front-panel key
Prior to A.02.00
SPAN X Scale
BASIC, PN, WCDMA, C2K, GSM, WIMAX OFDMA, TD-SCDMA,
1xEV-DO, DVB-T/H, DTMB (CTTB), ISDB-T, CMMB, LTE, LTETDD,
Digital Cable TV
:DISPlay:WAVeform:VIEW[1]|2:WINDow[1]:TRACe:X[:SCALe]:R
LEVel <time>
:DISPlay:WAVeform:VIEW[1]|2:WINDow[1]:TRACe:X[:SCALe]:R
LEVel?
DISP:WAV:VIEW:WIND:TRAC:X:RLEV 10 ms
DISP:WAV:VIEW:WIND:TRAC:X:RLEV?
You must be in a mode that includes the Waveform measurement to use this
command. Use INSTrument:SELect to set the mode.
If Auto Scaling is set to On, this value is automatically determined by the
measurement result. When you set this value manually, Auto Scaling
automatically changes to Off.
0.00 s
Saved in instrument state.
–1.000 s
10.00 s
Prior to A.02.00
A.03.00
SPAN X Scale
Waveform Measurement
Span X Scale
339