Window Control Keys; Multi-Window; Zoom - Agilent Technologies X Series Manual

About the Instrument

Window Control Keys

Window Control Keys
The instrument provides three front-panel keys for controlling windows. They are
and Next Window . These are all "immediate action" keys.

Multi-Window

The Multi Window front-panel key will toggle you back and forth between the Normal View and the last
Multi Window View (Zone Span, Trace Zoom or Spectrogram) that you were in, when using the Swept
SA measurement of the Spectrum Analyzer Mode. It remembers which View you were in through a
Preset. This "previous view" is set to Zone Span on a Restore Mode Defaults.
Key Path
Initial S/W Revision

Zoom

Zoom is a toggle function. Pressing once Zooms the selected window; pressing again un-zooms.
When Zoom is on for a window, that window will get the entire primary display area. The zoomed
window, since it is the selected window, is outlined in green.
Zoom is local to each Measurement. Each Measurement remembers its Zoom state. The Zoom state of
each Measurement is part of the Mode's state.
Data acquisition and processing for the other windows continues while a window
NOTE
is zoomed, as does all SCPI communication with the other windows.
84
Front-panel key
Prior to A.02.00
, ,
Multi Window Zoom
Chapter 2