Agilent Technologies X Series Manual page 508

Mode
cdma2000
Selects the cdma2000 mode for general purpose measurements of signals following this standard. There
are several measurements available in this mode.
If you are using the Help feature, this mode must be currently active to access its detailed information. If
it is not active, exit the Help feature (Esc key), select the mode, and re-access Help.
Key Path
Example
Initial S/W Revision
1xEV-DO
Selects the 1xEV-DO mode for general purpose measurements of signals following this standard. There
are several measurements available in this mode.
If you are using the Help feature, this mode must be currently active to access its detailed information. If
it is not active, exit the Help feature (Esc key), select the mode, and re-access Help.
Key Path
Example
Initial S/W Revision
LTE
Selects the LTE mode for general purpose measurements of signals following the LTE FDD standard.
There are several measurements available in this mode.
If you are using the Help feature, this mode must be currently active to access its detailed information. If
it is not active, exit the Help feature (Esc key), select the mode, and re-access Help.
Key Path
Example
Initial S/W Revision
508
Mode
INST:SEL CDMA2K
INST:NSEL 10
Prior to A.02.00
Mode
INST:SEL CDMA1XEV
INST:NSEL 15
Prior to A.02.00
Mode
INST:SEL LTE
INST:NSEL 102
Prior to A.02.00