Agilent Technologies X Series Manual page 139

Themes
Accesses a menu of functions that enable you to choose the theme to be used when saving the screen
image.
The Themes option is the same as the Themes option under the Display and Page Setup dialogs. It
allows you to choose between themes to be used when saving the screen image.
Key Path
Remote Command
Example
Preset
Readback
Initial S/W Revision
3D Color
Selects a standard color theme with each object filled, shaded and colored as designed.
Key Path
Example
Readback
Initial S/W Revision
3D Monochrome
Selects a format that is like 3D color but shades of gray are used instead of colors.
Key Path
Example
Readback
Initial S/W Revision
Flat Color
Selects a format that is best when the screen is to be printed on an ink printer.
Key Path
Example
Readback
Save, Screen Image
:MMEMory:STORe:SCReen:THEMe
TDColor|TDMonochrome|FCOLor|FMONochrome
:MMEMory:STORe:SCReen:THEMe?
:MMEM:STOR:SCR:THEM TDM
3D Color; Is not part of Preset, but is reset by Restore Misc Defaults or
Restore System Defaults All and survives subsequent running of the modes.
3D Color | 3D Mono | Flat Color | Flat Mono
Prior to A.02.00
Save, Screen Image, Themes
MMEM:STOR:SCR:THEM TDC
3D Color
Prior to A.02.00
Save, Screen Image, Themes
MMEM:STOR:SCR:THEM TDM
3D Mono
Prior to A.02.00
Save, Screen Image, Themes
MMEM:STOR:SCR:THEM FCOL
Flat Color
System Functions
Save
139