Using Ethernet Communications On The Terminal; How The 2461 Fits Into Your Ethernet Network - Intermec Trakker Antares 2460 User Manual

TRAKKER Antares 246X Stationary Terminal User's Manual

Using Ethernet Communications on the Terminal

4-12
Before you can begin using the 2461 terminal to collect data, you need to install and
configure each device in the Ethernet network by performing these steps:
1. Plan and prepare your network. Make sure you have unique IP addresses for all
devices in the network. Make sure you have all the equipment required to use the
2461.
2. Configure the DCS 300 (2461 with UDP Plus).
3. Configure each 2461 terminal.
Each step is described in detail in the next sections.

How the 2461 Fits Into Your Ethernet Network

The 2461 terminal is a versatile terminal that you can easily add to your network or
distributed data collection system. You can use the 2461 as an end device in your
Ethernet network.
TCP/IP
2461
In a UDP Plus network, the 2461 communicates with a host computer through the DCS
300 using UDP Plus for the network protocol. In a TCP/IP network, the 2461
communicates with a host computer directly using TCP/IP for the network protocol.
nugget
Host
Ethernet
DCS 300
2461
246XU.023
39
UDP Plus
2461
2461