Connecting The Power Supply - Intermec Trakker Antares 2460 User Manual

Connecting the Power Supply

You connect power to the terminal using the main power supply.
To connect the power supply
1. Connect the power supply to the power connector on the terminal. Connect the
power cable from the power supply to a powered electrical outlet.
Power
connector
2. To make sure that you keep the power supply cable connected to the terminal, take
a loop of the power supply cable and secure it to the strain relief using a tie-wrap.
Strain
relief
To power
supply
39
nugget Installing the Terminal
Power supply
246XU.005
246XU.006
2
Power cable
2-5