Code 93 - Intermec Trakker Antares 2460 User Manual

Or: To set one of the function codes to a character string:
1. Scan one of these bar codes:
2. Scan any character from the "Full ASCII Bar Code Chart" in Appendix B. You can
3. Scan this bar code:

Code 93

Purpose: Enables or disables decoding of Code 93 symbology. Code 93 is a variable length,
continuous symbology that uses four element widths.
Syntax: CFdata
Acceptable values for data are:
0
1
Default: Disabled
Scan: One of these bar codes:
Disable Code 93
*$+CF0*
*$+CF0*
C d 39
Nugg
Enter Accumulate Mode / Set Function Code 1
*+/$+CK*
*+/$+CK*
Enter Accumulate Mode / Set Function Code 2
*+/$+CL*
*+/$+CL*
Enter Accumulate Mode / Set Function Code 3
*+/$+CM*
*+/$+CM*
define two characters each for Function Codes 1 and 3, and four characters for
Function Code 2.
Exit Accumulate Mode
*-/*
*-/*
Disabled
Enabled
Configuration Command Reference
Enable Code 93
*$+CF1*
*$+CF1*
8
8-23