Run Program - Intermec Trakker Antares 2460 User Manual

TRAKKER Antares 246X Stationary Terminal User's Manual

Run Program

Purpose:
From Network:
Scan:
Or:
Example:
7-22
Runs the specified program or application that is stored on the terminal. For help, see
Chapter 5, "Programming the Terminal."
Note: You cannot store and run applications from the RAM drive (E).
// drive:filename
where:
// is the command to run an application.
drive: indicates the drive where the application is stored. You must include
the colon (:) after the drive letter.
filename is the application you want to run.
1. Scan this bar code label:
Enter Accumulate Mode / Run Program
*+///*
*+///*
2. Scan the bar code label(s) for the application you want to run. You can scan labels
from the "Full ASCII Bar Code Chart" in Appendix B. The label must use this
format:
drive:filename
3. Scan this bar code label to exit Accumulate mode and run the application.
Exit Accumulate Mode
*-/*
*-/*
You can create your own bar code labels to run applications by creating a bar code in
this command format:
// drive:filename
To run the application
SHIPPING.BIN
//c:shipping.bin
39
nugget
, use this command: