Introducing the Trakker Antares Oracle-Ready Terminal This guide describes how to start using your ® Trakker Antares Oracle-Ready terminal: 2415, 2425, 2455, 2475, 2481, or 2486. To use your Trakker Antares Oracle-Ready terminal, you need to perform these steps: 1. (2455, 2475, and 2481/6) Install the terminal. 2.
6. (2455, 2475) Install and connect the DC power supply and charge the backup battery. 7. (2455, 2475) Connect to input devices and serial devices. For help, see the getting started guide or quick start guide that ships with the terminal. Installing and Connecting Power and Battery Packs The 2415, 2425, and 2435 use a lithium-ion...
To set the time and date 1. Scan this bar code to access the TRAKKER Antares 2400 Menu System: TRAKKER Antares 2400 Menu System *..-.* *..-.* 2. Select the System Menu and press the Enter key. Select the Set Time and Date command and press the Enter key.
32 case-sensitive alphanumeric characters. WEP encryption enabled, WEP transmit key selected, and WEP key value entered. 3. Exit the TRAKKER Antares 2400 Menu System, and save all changes. The terminal restarts and connects to the Oracle Mobile Applications.
Page 8
Trakker Antares Bar Code Labels Use these labels to create a bar code quick reference card. Backlight On *%.1* *%.1* Backlight Off *%.0* *%.0* Darker or Brighter Display Contrast *$+DJ9* *$+DJ9* Brighter or Darker Display Contrast *$+DJ8* *$+DJ8* Raise Beep Volume *$+BV9* *$+BV9* Lower Beep Volume...
Page 9
Enter Accumulate Mode *+/* *+/* Exit Accumulate Mode *-/* *-/* TRAKKER Antares 2400 Menu System *..-.* *..-.* Boot Terminal *-.1* *-.1* Reset Firmware *-.* *-.* Default Configuration *.+0* *.+0* Save Configuration in Flash Memory *.+1* *.+1* Enter Accumulate Mode *+/*...