Starting The Application And Using The Terminal; Turning The Terminal On And Off - Intermec Trakker Antares 2460 User Manual

TRAKKER Antares 246X Stationary Terminal User's Manual

Starting the Application and Using the Terminal

Your 246X terminal ships with these applications already loaded:
•
•
To start the application and use the terminal
•
For help on downloading custom applications, see Chapter 5, "Programming the
Terminal."
The 9560 application emulates a subset of the functionality available on the 95XX
terminals. You can use the application to scan, enter, and display data. For help using
the default application or the 9560 emulation application, see Appendix C, "Using the
Default Applications."

Turning the Terminal On and Off

The
press
Suspend mode. This mode is referred to as "off" in the rest of this manual. In Suspend
mode, the terminal continues to power all memory and turns off the power to most of
the hardware.
When you press
was when you turned it off, or the terminal boots and restarts your application. Resume
is controlled through a parameter or command called Resume Execution. By default,
the terminal resumes your application. For help, see "Resume Execution" in Chapter 8.
You can configure the terminal to disable the
disabled, you cannot turn off the terminal. By default, the
can turn the terminal on and off. For help, see "Suspend/Resume Control" in Chapter 8.
2-18
Sample application (APPTSK.BIN)
9560 emulation application (EM9560.BIN)
9
Press to turn on the terminal. The login or initial screen for your application
appears.
Sample Application
1998/01/01 12:00:00
9
9
button on the front of the terminal acts as a Suspend/Resume key. When you
to turn off the terminal, the terminal does not actually shut off, but goes into a
9
to turn on the terminal, the terminal either resumes exactly where it
39
nugget
9560 Emulation Application
9
9
button. When the
246XU.014
9
button is
key is enabled so that you