Pin Assignments For Com1; Pin Assignments For Com2 - Intermec Trakker Antares 2460 User Manual

TRAKKER Antares 246X Stationary Terminal User's Manual

Pin Assignments for COM1

Use a PC/AT compatible 8-pin D-Sub connector for the RS-232 serial cable.
Request to send (RTS) - 7

Pin Assignments for COM2

Use a female, 25-pin, D-Sub connector for the RS-232/422/485 serial cable. The COM2
connector is compatible with the 9560 pin assignments. Your RS-422 or RS-485 cable
can be up to 2000 feet in length.
Data terminal ready (DTR) - 20
A-6
Data set ready (DSR) - 6
Clear to send (CTS) - 8
Not used - 9
Not used - 25
Not used - 24
Not used - 23
Not used - 22
Not used - 21
Transmit data B (TXDB) - 19
Not used - 18
Not used - 17
Receive data A (RXDB) - 16
Not used - 15
Transmit data A (TXDA) - 14
39
nugget
1 - Carrier detect (CD)
2 - Received data (RXD)
3 - Transmitted data (TXD)
4 - Data terminal ready (DTR)
5 - Ground (GND)
246XU.026
13 - Receive data B (RXDB)
12 - Not used
11 - Not used
10 - Not used
9 - Not used
8 - Not used
7 - Ground (GND)
6 - Not used
5 - Clear to send (CTS)
4 - Request to send (RTS)
3 - Received data (RXD)
2 - Transmitted data (TXD)
1 - Not used
246XU.027