Intermec Trakker Antares 2460 User Manual page 99

a. In the PC filename and path field, type the path and filename (
or
FILENAME.BIN
filename from a list by clicking on the down arrow.
To view a list of available files on your PC, click the Browse button.
b. In the TRAKKER Antares filename field, type the drive and filename on the
terminal. You can select a previously used filename from a list by clicking on
the down arrow.
Applications must be stored on drive C. Depending on your 246X terminal
options and configuration, you can download other files to drive C, D, or E.
7. If you are downloading an application and want to run it on the terminal
immediately after it is downloaded, enable the Run program check box.
Note: You can also run the application at any time from the terminal. For help, see
"How to Download and Run Applications" earlier in this chapter.
8. Click Download to copy the file from the PC to the terminal. If you enabled the
Run program check box, the terminal boots, resets, and runs the application you
downloaded. Otherwise, the current application continues to run on the terminal.
Or, click Upload to copy the file from the terminal to the PC.
9. To download or upload another file, repeat Step 5 through Step 7.
10. Click Exit to close the FileCopy utility.
39
nugget Programming the Terminal
) for the file on your PC. You can select a previously used
5
FILENAME.EXE
5-11