Scanner Selection - Intermec Trakker Antares 2460 User Manual

Scanner Selection

Purpose: Identifies the type of scanner you have connected to the 246X terminal. The terminal
can optimize the scanning performance by using the scanner you define in this
command. When you select a specific scanner, other scanners may not function
properly. Your terminal may not work if you connect an incompatible scanner.
Syntax: SSdata
Acceptable values for data are:
0
1
3
4
5
6
7
Default: All compatible scanners
Scan: One of these bar codes:
All Compatible Scanners
*$+SS0*
*$+SS0*
151X Laser Scanners
*$+SS3*
*$+SS3*
Compatible Symbol Scanners
*$+SS5*
*$+SS5*
Long Range Laser Scanners
*$+SS7*
*$+SS7*
C d 39
Nugg
All compatible scanners (including wands)
146X CCD scanners
151X laser scanners
1545 laser scanner
Compatible Symbol scanners (with reverse polarity enabled)
155X laser scanners
Long range laser scanner
Configuration Command Reference
146X CCD Scanners
*$+SS1*
*$+SS1*
1545 Laser Scanner
*$+SS4*
*$+SS4*
155X Laser Scanners
*$+SS6*
*$+SS6*
8
8-73