Suspend/Resume Control - Intermec Trakker Antares 2460 User Manual

TRAKKER Antares 246X Stationary Terminal User's Manual
Subnet Mask (continued)
5. Scan this bar code:

Suspend/Resume Control

Purpose: Controls the operation of the
the
default, the
Syntax: EFdata
Acceptable values for data are:
0
1
Default: Enabled
Scan: One of these bar codes:
Enable
*$+EF0*
*$+EF0*
Disable
*$+EF1*
*$+EF1*
8-82
Exit Accumulate Mode
*-/*
*-/*
9 9
9
button. When the
button is enabled so that you can turn the terminal on and off.
Enabled
Disabled
9
Button
9
Button
C d 39
Nugg
9
button (suspend/resume). You can enable or disable
button is disabled, you cannot turn off the terminal. By