TRAKKER Antares 246X Stationary Terminal User's Manual
Time and Date (continued)
3. Scan this bar code:
Time in Seconds
Purpose:
If you enable the Append Time command, you can enable the Time in Seconds
command to append the seconds to each bar code label that is scanned into the terminal.
To append the time in hours and minutes, disable the Time in Seconds command.
Syntax:
DAdata
Acceptable values for data are:
0
1
Default:
Disabled
Scan:
One of these bar codes:
Disable Time in Seconds
*$+DA0*
*$+DA0*
Enable Time in Seconds
*$+DA1*
*$+DA1*
8-88
Exit Accumulate Mode
*-/*
*-/*
Disabled
Enabled
C d 39
Nugg